BOYSEN Acrytex™ Cast B‑1711

BOYSEN Acrytex™ Cast B‑1711

Overview:

BOYSEN Acrytex™ Cast B-1711 is a solvent-based acrylic putty designed to repair hairline cracks and surface imperfections on masonry, concrete, wood, and fiber cement boards. It also serves as a durable texturing material when applied by spray.

Key Features:

• Seamless, water-repellent finish

• Excellent adhesion and long-term flexibility

• Can be applied as a putty or sprayed for textured finish

• Helps prevent water seepage and surface deterioration

Recommended Applications:

• Filling hairline cracks and patching surface defects

• Texturing for decorative or protective coating systems

• Suitable for concrete, masonry, wood, and fiber cement boards

• Ideal for both interior and exterior surfaces

Technical Data:

• Vehicle Type: Thermoplastic acrylic

• Dry Times: Touch – 30 minutes; Recoat – 4 hours (at 25 °C, 50% RH)

• Density: Approx. 1.58 kg/L

• Coverage (4 L):

  • As Putty: 10–12 m²

  • As Texture: 5–6 m²

• Thinning / Cleanup: Use BOYSEN Acrytex Reducer B-1750

• Packaging: Available in 4-liter and 16-liter cans

System & Application Guidelines:

1. Surface Preparation:

   • Cure new concrete for 14–28 days.

   • Clean surfaces thoroughly, removing loose paint, chalk, and mildew.

   • Sand wood smooth and remove dust.

   • For chalky surfaces, apply Boysen Chalk Blocker prior to priming.

2. Priming:

   • Prime bare surfaces using Acrytex Primer B-1705 before applying cast.

3. Application:

   • Putty: Apply with a putty knife to fill imperfections. Allow to dry and spot-prime before topcoating.

   • Texture: Spray with mortar gun, then flatten with a damp wooden roller after 10–15 minutes.

4. Topcoating:

   • After putty or texture application, finish with at least two coats of Acrytex Topcoat.