BOYSEN Acrytex™ Clear Coat B‑1700

BOYSEN Acrytex™ Clear Coat B‑1700

Overview:

BOYSEN Acrytex™ Clear Coat B‑1700 is a solvent-based, thermoplastic acrylic clear finish designed to protect and enhance the natural beauty of brick, masonry, natural stone, and wooden surfaces. It forms a seamless, high-gloss, water-resistant barrier that resists UV exposure and makes cleaning easier (boysen.com.ph).

Key Features:

• Crystal-clear, high-gloss finish

• Excellent adhesion and long-term durability

• Seamless & water-repellent, preventing moisture penetration

• UV-resistant and non-yellowing

• Easy to clean and maintain

• Suitable for both interior and exterior applications

Recommended Applications:

• Protective coating for brick, natural stone, and masonry

• Clear protective layer for properly prepared wood

• Ideal over decorative finishes and faux cement wall systems

• Not recommended for floors or surfaces prone to scratching

Technical Data:

• Vehicle Type: Thermoplastic acrylic

• Finish: Gloss

• Dry Times (at 25 °C, 50% RH): Touch – ~30 minutes; Recoat – ~2 hours

• Density: ~0.92 kg/L

• Theoretical Coverage: ~25–30 m² per 4 L at 25–30 µm dry film thickness (DFT)

• Thinning & Cleanup: Acrytex Reducer B‑1750 (approx. 1 L reducer per 4 L coating)

• Packaging: Available in 4‑liter cans

System & Application Guidelines:

1. Surface Preparation:

   • Ensure new masonry or concrete is fully cured (14–28 days), clean, and dry.

   • For wood, sand smooth and remove dust and debris.

   • Remove any existing non-Acrytex coatings.

2. Application:

   • Apply 2–3 coats by brush, roller, or spray.

   • For best results, thin with Acrytex Reducer B‑1750 (1:4 for brush/roller; up to 1:1 for spray).

3. Curing:

   • Allow proper cure between coats (~2 hours) and full protection suitable for light exposure typically after 3 days.