Skip to Content
  1. All Products
  2. Paints
  3. Davies - Epoxy Primer Gray DV-92-61
-
Davies - Epoxy Primer Gray DV-92-61

Davies - Epoxy Primer Gray DV-92-61

(0 review)
Davies® Epoxy Primer Gray DV-92-61 is a high-performance, two-component epoxy-based primer formulated to provide exceptional adhesion, corrosion resistance, and surface sealing for a wide range of substrates, including concrete, metal, wood, and fiberglass. Designed for use as a basecoat under epoxy enamels and polyurethane topcoats, this primer delivers excellent chemical resistance and durability in both industrial and marine environments.
1.12 ₱ 1.12 ₱ Tax Included

Not Available For Sale

(1.12 ₱ / Units)

This combination does not exist.

Contact Us

Share

Davies® Epoxy Primer Gray DV-92-61 – Two-Component Epoxy-Based Primer for Concrete, Metal & Wood

Overview

Davies® Epoxy Primer Gray DV-92-61 is a high-performance, two-component epoxy-based primer formulated to provide exceptional adhesion, corrosion resistance, and surface sealing for a wide range of substrates, including concrete, metal, wood, and fiberglass. Designed for use as a basecoat under epoxy enamels and polyurethane topcoats, this primer delivers excellent chemical resistance and durability in both industrial and marine environments.

Ideal for demanding applications, Davies® Epoxy Primer penetrates porous surfaces, seals uneven substrates, and promotes strong bonding between the surface and the topcoat system—ensuring maximum coating performance and service life.

Key Features

  • Two-Component Epoxy System – Strong, chemical-resistant primer base
  • Excellent Adhesion to Concrete, Metal, Wood, and Fiberglass
  • Corrosion and Moisture Resistant – Ideal for industrial, marine, or automotive use
  • Penetrates and Seals Porous Surfaces – Prepares substrates for epoxy or PU topcoats
  • Gray Finish for Easy Visibility and Coverage
  • Suitable for Interior and Protected Exterior Environments

Recommended Uses

  • Concrete floors, walls, and tanks
  • Structural steel, aluminum, and galvanized metal
  • Machinery, metal fabrications, and pipes
  • Marine hulls (above waterline), boat parts, and industrial vehicles
  • Wood panels and engineered wood in industrial settings

Application Guidelines

Surface Preparation:

Surface must be clean, dry, and free of grease, rust, oil, wax, and loose paint.

  • Metal surfaces: Degrease and sandblast or abrade to bare metal
  • Concrete surfaces: Allow new concrete to cure for at least 28 days; acid-etch or mechanically roughen for best results

Mixing Instructions:

Mix Part A (Base) and Part B (Hardener) in the prescribed ratio. Stir thoroughly until completely blended. Use only the amount that can be applied within its pot life (approx. 2–3 hours).

Application Methods:

Brush, roller, or spray

Thinning:

Thin with Davies® Epoxy Reducer if needed (typically 5–10%) depending on application method

Drying Time:

  • Touch Dry: 2–4 hours
  • Recoat: 8–12 hours
  • Full Cure: 5–7 days

Coverage:

8–10 square meters per liter per coat (depending on surface type and porosity)

Finish:

Flat gray

Pack Sizes:

Available in 1L, 4L, and 16L sets (includes Part A and Part B)

Color:

Gray (DV-92-61)

Topcoat Compatibility:

Designed as a primer for:

  • Davies® Epoxy Enamel
  • Davies® Polyurethane Topcoats
  • Davies® Epoprime and EpoSeal Systems

Safety & Clean-Up:

  • Flammable – keep away from heat and flame
  • Use with adequate ventilation and proper PPE (respirator, gloves)
  • Avoid skin and eye contact
  • Clean tools with Davies® Epoxy Reducer immediately after use
  • Store unmixed components in tightly sealed containers
  • Keep out of reach of children