Davies - Wood Bleach

Davies® Wood Bleach – Two-Part Wood Brightening System for Lightening Natural Wood

Overview

Davies® Wood Bleach is a two-component wood bleaching system specially formulated to lighten the natural color of wood, remove dark stains, and even out blotchy or uneven tones caused by aging, water damage, or tannin stains. Ideal for both softwoods and hardwoods, this system helps restore or enhance wood’s natural appearance before staining or clear finishing.

It’s perfect for woodworkers, furniture restorers, and DIYers looking to achieve brighter, more uniform wood tones. Davies® Wood Bleach is commonly used to prepare reclaimed, weathered, or discolored wood for refinishing or decorative use.

Key Features

• Two-Part Formula (A + B) – Ensures effective bleaching action
• Lightens Natural Wood Color – Ideal for restoring aged or darkened wood
• Removes Stains & Discoloration – Tackles water, rust, and tannin stains
• Prepares Wood for Staining or Varnishing – Evens out wood tone for better finish results
• Suitable for Hardwood & Softwood – Versatile and effective across many species
• Easy to Mix & Apply – For use on furniture, panels, moldings, and more

Recommended Uses

• Furniture restoration and refinishing
• Reclaimed wood panels or doors
• Cabinetry and indoor woodwork
• Decorative woodcraft and wood flooring (non-sealed)
• Water- or tannin-stained wood surfaces

Application Guidelines

Surface Preparation:

Ensure the wood is bare, clean, and free from sealers, wax, varnish, or paint. Sand surface if needed and wipe clean of dust.

Mixing Instructions:

Mix equal parts of Davies® Wood Bleach Part A and Part B in a non-metallic container. Apply the solution immediately after mixing.

Application Method:

Use a clean brush or sponge. Apply evenly across the wood surface. For deeper bleaching, a second application may be applied after the first dries.

Drying Time:

• Bleach Reaction: 4–6 hours
• Fully Dry: 8–12 hours before sanding or topcoating

Post-Treatment:

Neutralize with clean water or a mild vinegar solution. Allow surface to dry completely before sanding or applying stain/varnish.

Pack Sizes:

Available in:

• 1L set (500ml Part A + 500ml Part B)
• 4L set (2L Part A + 2L Part B)

Appearance:

Clear liquid components; dries without residue

Topcoat Compatibility:

Once dry and neutralized, surface can be topcoated with:

• Davies® Wood Stains
• Davies® Polyurethane or Acrylic Varnishes
• Davies® AquaWood™, Hi-Solids Lacquer, or Oil-Based Finishes

Safety & Clean-Up:

• Use gloves and eye protection
• Work in a well-ventilated area
• Avoid contact with skin or eyes
• Do not store mixed solution—prepare only what is needed
• Clean tools with water immediately after use
• Store Parts A and B separately, tightly sealed, in a cool, dry place
• Keep out of reach of children